Soluble and conductive polypyrrole copolymers containing silicone tegomers

Soluble and processable conductive copolymers of silicone tegomers and pyrrole were developed. This was easily accomplished by the oxidative polymerization of pyrrole monomer by Ce(IV) salt in the presence of silicone tegomers with hydroxyl chain ends. The resulting copolymers were soluble in dimethylformamide. The products were characterized by Fourier transform infrared, ¹H‐NMR, and four‐point probe conductivity, and their surface properties were investigated with contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2896–2901, 2003     

Significance of fluid regime in biological filtration

A dispersed flow model previously developed to study substrate utilization in unsaturated media was experimentally verified and its practical application was considered. For this purpose, measurements were made using tap water and a synthetic feed solution. The importance of the change in fluid regime as regards to the simultaneous transport and reaction within biological filters were demonstrated. The effect of drop formation and the breakage of liquid jets inside the filters on substrate utilization was also shown.     

High-quality photonic sampling streams from a semiconductor diodering laser

We report on the development of an ultralow-noise, external-cavity, actively mode-locked semiconductor diode laser for application in next-generation photonic sampling systems. A summary of harmonically mode-locked noise characteristics in a 65-MHz ring cavity is presented through the range of pulse repetition frequencies between 130 MHz and 8.3 GHz (2nd-128th harmonic). Important implications regarding the use of gain-versus-loss modulation as the active modelocking mechanisms are discussed. We also report what are, to our knowledge, the lowest noise characteristics achieved to date for a semiconductor diode laser operating at 10 GHz. Individually optimized results of 0.12% rms amplitude noise (10 Hz-10 MHz), and 43 fs rms residual phase jitter (10 Hz-10 MHz) provide a theoretical resolution of 8.6 bits in a 10-GSPS optical analog-to-digital converter. We have also achieved dispersion-compensated pulsewidths; as short as 1.2 ps, and shown successful operation of a novel phase-locked-loop capable of reducing the rms; residual phase noise by as much as 91% within its response bandwidth. Finally, the first measurements of residual phase noise out to the Nyquist frequency (5 GHz) are presented, providing an upper bound on the rms residual phase jitter of 121 fs (10 Hz-5 GHz)     

A STUDY OF THE FLOTATION OF OXIDIZED AHASRA COAL

The flotation of oxidized Amasra Coal which was collected between 1973-1978 and, stored in the atmospheric conditions was examined In this work. Coal samples were fractioned by wet screening to +0.560 mm, -0.500 + 0.140 mm, -0.140 mm particle sizes and first fraction was ground to -0.560 mm before flotation. Motorin and pine oil which had been heated at 125° C for 5 hours were used ns flotation reagents. The influence of impeller speed, aeration rate, solid concent of the pulp, reagent amounts were examined and optimum values were determined. Increase of the pine oil amount added to the pulp, increased the coal. recovery on the flotation of this oxidized coal.     

Thermodynamic analysis of solar photovoltaic cell systems

The thermodynamic characteristics of solar photovoltaic (PV) cells are investigated from a perspective based on exergy. A new efficiency is developed that is useful in studying PV performance and possible improvements. Exergy analysis is applied to a PV system and its components, and exergy flows, losses and efficiencies are evaluated. Energy efficiency is seen to vary between 7% and 12% during the day. In contrast, exergy efficiencies, which incorporate the second law of thermodynamics and account for solar irradiation exergy values, are lower for electricity generation using the considered PV system, ranging from 2% to 8%. Values of “fill factors” are determined for the system and observed to be similar to values of exergy efficiency.     

THE RELATION BETWEEN WETTING EFFICIENCY AND LIQUID HOLDUP IN PACKED COLUMNS

Liquid holdup and wetting efficiency in packed columns were determined using a tracer method. A new model was developed considering axial dispersion, and analysis was made using the moment technique. The saturated solution of KG was used as an inert tracer and total liquid holdups were determined in the first part of experiments. As an adsorbable tracer, dioxane was utilized in the second part of the work and wetting efficiencies were obtained. Adsorption equilibrium constant was determined by the experiments conducted in a liquid full bed. A model proposed between liquid holdup and wetting efficiency gave good agreement with the experimental results. Axial dispersion effects were also taken into account during the work. It was also shown that axial dispersion of liquid phase should be considered especially in the small scale trickle bed reactors. @KEYWORDS:Packed beds,Wetting efficiency,Liquid holdup,Tracer method,Moment technique,Trickle bed reactors.     

Methane to higher hydrocarbons via halogenation

Activation of methane with a halogen followed by the metathesis of methyl halide is a novel route from methane to higher hydrocarbons or oxygenates. Thermodynamic analysis revealed that bromine is the most suitable halogen for this goal. Analysis of the published data on the reaction kinetics in a CSTR enabled us to judge on the effects of temperature, reactor residence time and the feed concentrations of bromine and methane to the conversion of methane and the selectivity towards mono or dibromomethane. The analysis indicated that high dibromomethane selectivity is attainable (over 90%) accompanied by high methane conversions. The metathesis of dibromomethane can provide an alternative route to the conversion of methane (natural gas) economically with smaller installations than the current syn-gas route.     

Diffusion and influence of Cu on properties of CdTe thin films and CdTe/CdS cells

The effective diffusion coefficients of Cu for thermal and photodiffusion in the CdTe films have been estimated from resistivity versus duration of thermal or photoannealing curves. In the temperature range 60–200°C the effective coefficient of thermal diffusion (D_t) and photodiffusion (D_ph) are described as D_t=7.3×10⁻⁷exp(−0.33/kT) and D_ph=4.7×10⁻⁸exp(−0.20/kT).It is found that the diffusion doping of CdTe thin films by Cu at 400°C results in a sharp decrease of resistivity up to 7 orders of magnitude of p-type material, depending on thickness of Cu film. The comparative study of performance of CdTe(Cu)/CdS and CdTe/CdS cells has been studied. It is shown that the diffusion doping of CdTe film by Cu increases efficiency of CdTe(Cu)/CdS cells from 0.9% to 6.8%. The degradation of photovoltaic parameters of CdTe(Cu)/CdS cell, during testing under forward and reverse bias at room temperature, proceeds at a larger rate than those of CdTe/CdS cell without Cu. The degradation of performance of CdTe(Cu)/CdS cells is tentatively assigned to electrodiffusion of Cu in CdTe, resulting in redistribution of concentration of Cu-related centers in CdTe film and heterojunction region.     

Dissolution kinetics of ulexite in acetic acid solutions

Ulexite is an important boron mineral used for the production of boron compounds. The aims of this study are to examine the dissolution kinetics of ulexite in acetic acid solutions, and to present an alternative process to produce boric acid. In order to investigate the dissolution kinetics of ulexite in acetic acid solutions, the concentration of solution, reaction temperature, solid-to-liquid ratio, and particle size were selected as experimental parameters. It was determined that the dissolution rate of ulexite increased with increasing solution concentration and temperature and decreasing particle size and solid-to-liquid ratio. The activation energy of the process was found to be 55.8 kJ/mol.